Polamco are an official UK distributor for HellermannTyton® Heatshrink Boots
The use of Hellerman Tyton heatshrink moulded shapes in conjunction with our specialist heatshrink tubing makes it easy to fabricate complete jacketed wire and cable harnessing and interconnection systems of the highest quality. Heatshrink shapes are available for the complete range of electrical and electronic harnessing applications. They can be sealed with special adhesives and encapsulants to ensure the proper degree of mechanical support, strain relief and environmental protection. Encapsulating the complete harnessing and interconnection system to the desired configuration is easily and neatly accomplished, with minimum weight and bulk.
When ordering heatshrink shapes, it is necessary to give a complete part number to enable efficient processing of your order. Part numbers can be made up of the following typical components
|
Heatshrink Boot Shape
|
fits entry sizes |
recommended entry sizes
|
minimum cablejacket diameter
|
maximum cablejacket diameter
|
recovered bootlength +/-10% |
Comments |
| 120-41 |
03-05 |
03-04 |
3,0 |
10,7 |
38,0 |
|
| 152-42 |
03-10 |
05 |
6,0 |
24,0 |
38,0 |
Ideal when 154-42 is too long |
| 153-42 |
03-10 |
05-10 |
3,5 |
9,0 |
55,0 |
Ideal when cable jacket diameter is much smaller than the adaptor entry size |
| 154-42 |
03-14 |
05-06 |
6,0 |
30,0 |
55,0 |
|
| 155-42 |
07-14 |
07-09 |
7,0 |
31,0 |
67,0 |
|
| 156-42 |
10-17 |
10-12 |
8,5 |
36,0 |
80,0 |
|
| 157-43 |
13-22 |
13-17 |
10,0 |
43,0 |
99,0 |
|
| 158-43 |
18-24 |
18-24 |
16,0 |
60,0 |
130,0 |
|
|